Tuesday, December 22, 2009

Types of coal


Believed approximate position of the proto-continents toward the end of the Carboniferous period; the light blue represents shallow seas where many of today's coal deposits are found, as opposed to deeper waters which gave rise to oil bearing rocks derived from marine species. The ice caps were known to be very large, lowering sea levels extensively by locking up oceanic waters into solid ice, though how large the ice caps became is a matter of debate.

As geological processes apply pressure to dead biotic matter over time, under suitable conditions it is transformed successively into

  • Peat, considered to be a precursor of coal, has industrial importance as a fuel in some regions, for example, Ireland and Finland. In its dehydrated form, peat is a highly effective absorbent for fuel and oil spills on land and water.
  • Lignite, also referred to as brown coal, is the lowest rank of coal and used almost exclusively as fuel for electric power generation. Jet is a compact form of lignite that is sometimes polished and has been used as an ornamental stone since the Iron Age.
  • Sub-bituminous coal, whose properties range from those of lignite to those of bituminous coal are used primarily as fuel for steam-electric power generation. Additionally, it is an important source of light aromatic hydrocarbons for the chemical synthesis industry.
  • Bituminous coal, dense mineral, black but sometimes dark brown, often with well-defined bands of bright and dull material, used primarily as fuel in steam-electric power generation, with substantial quantities also used for heat and power applications in manufacturing and to make coke.
  • Anthracite, the highest rank; a harder, glossy, black coal used primarily for residential and commercial space heating. It may be divided further into metamorphically altered bituminous coal and petrified oil, as from the deposits in Pennsylvania.
  • Graphite, technically the highest rank, but difficult to ignite and is not so commonly used as fuel: it is mostly used in pencils and, when powdered, as a lubricant.

The classification of coal is generally based on the content of volatiles. However, the exact classification varies between countries. According to the German classification, coal is classified as follows:[2]

Name Volatiles % C Carbon % H Hydrogen % O Oxygen % S Sulfur % Heat content kJ/kg
Braunkohle (Lignite) 45-65 60-75 6.0-5.8 34-17 0.5-3 <28470
Flammkohle (Flame coal) 40-45 75-82 6.0-5.8 >9.8 ~1 <32870
Gasflammkohle (Gas flame coal) 35-40 82-85 5.8-5.6 9.8-7.3 ~1 <33910
Gaskohle (Gas coal) 28-35 85-87.5 5.6-5.0 7.3-4.5 ~1 <34960
Fettkohle (Fat coal) 19-28 87.5-89.5 5.0-4.5 4.5-3.2 ~1 <35380
Esskohle (Forge coal) 14-19 89.5-90.5 4.5-4.0 3.2-2.8 ~1 <35380
Magerkohle (Non baking coal) 10-14 90.5-91.5 4.0-3.75 2.8-3.5 ~1 35380
Anthrazit (Anthracite) 7-12 >91.5 <3.75 <2.5 ~1 <35300
Percent by weight

The middle six grades in the table represent a progressive transition from the English-language sub-bituminous to bituminous coal, while the last class is an approximate equivalent to anthracite, but more inclusive (the U.S. anthracite has <>

Cannel coal (sometimes called "candle coal"), is a variety of fine-grained, high-rank coal with a large amount of hydrogen. It consists primarily of "exinite" macerals, now termed "liptinite".

Early use

Outcrop coal was used in Britain during the Bronze Age (2000–3000 years BC), where it has been detected as forming part of the composition of funeral pyres.[3] The earliest recognized use is from the Shenyang area 4000 BC where Neolithic inhabitants had begun carving ornaments from black lignite, but it was not until the Han Dynasty (206 BC–220 AD) that coal was also used for fuel.[4] In Roman Britain, with the exception of two modern fields, "the Romans were exploiting coals in all the major coalfields in England and Wales by the end of the second century AD".[5] Evidence of trade in coal (dated to about AD 200) has been found at the inland port of Heronbridge, near Chester, and in the Fenlands of East Anglia, where coal from the Midlands was transported via the Car Dyke for use in drying grain.[6] Coal cinders have been found in the hearths of villas and military forts, particularly in Northumberland, dated to around AD 400. In the west of England contemporary writers described the wonder of a permanent brazier of coal on the altar of Minerva at Aquae Sulis (modern day Bath) although in fact easily-accessible surface coal from what became the Somerset coalfield was in common use in quite lowly dwellings locally.[7] Evidence of coal's use for iron-working in the city during the Roman period has been found.[8]

There is no evidence that the product was of great importance in Britain before the High Middle Ages, after about AD 1000. Mineral coal came to be referred to as "seacoal," probably because it came to many places in eastern England, including London, by sea. This is accepted as the more likely explanation for the name than that it was found on beaches, having fallen from the exposed coal seams above or washed out of underwater coal seam outcrops. These easily accessible sources had largely become exhausted (or could not meet the growing demand) by the 13th century, when underground mining from shafts or adits was developed.[3] In London there is still a Seacoal Lane and a Newcastle Lane (from the coal-shipping city of Newcastle) where in the seventeenth century coal was unloaded at wharves along the River Fleet.[9] An alternative name was "pitcoal," because it came from mines. It was, however, the development of the Industrial Revolution that led to the large-scale use of coal, as the steam engine took over from the water wheel.

Uses today


Coal rail cars in Ashtabula, Ohio.

Coal as fuel

Coal is primarily used as a solid fuel to produce electricity and heat through combustion. World coal consumption was about 6,743,786,000 short tons in 2006[10] and is expected to increase 48% to 9.98 billion short tons by 2030.[11] China produced 2.38 billion tons in 2006. India produced about 447.3 million tons in 2006. 68.7% of China's electricity comes from coal. The USA consumes about 14% of the world total, using 90% of it for generation of electricity.[12]

When coal is used for electricity generation, it is usually pulverized and then combusted (burned) in a furnace with a boiler. The furnace heat converts boiler water to steam, which is then used to spin turbines which turn generators and create electricity. The thermodynamic efficiency of this process has been improved over time. "Standard" steam turbines have topped out with some of the most advanced reaching about 35% thermodynamic efficiency for the entire process, although newer combined cycle plants can reach efficiencies as high as 58%. Increasing the combustion temperature can boost this efficiency even further.[13] Old coal power plants, especially "grandfathered" plants, are significantly less efficient and produce higher levels of waste heat. About 40% of the world's electricity comes from coal,[14] and approximately 49% of the United States electricity comes from coal.[15]

Fuels for heating

Heating oil
Wood pellet
Kerosene
Propane
Natural gas
Wood
Coal


The emergence of the supercritical turbine concept envisions running a boiler at extremely high temperatures and pressures with projected efficiencies of 46%, with further theorized increases in temperature and pressure perhaps resulting in even higher efficiencies.[16]

Other efficient ways to use coal are combined cycle power plants, combined heat and power cogeneration, and an MHD topping cycle.

Approximately 40% of the world electricity production uses coal. The total known deposits recoverable by current technologies, including highly polluting, low energy content types of coal (i.e., lignite, bituminous), is sufficient for many years. However, consumption is increasing and maximal production could be reached within decades (see World Coal Reserves, below).

A more energy-efficient way of using coal for electricity production would be via solid-oxide fuel cells or molten-carbonate fuel cells (or any oxygen ion transport based fuel cells that do not discriminate between fuels, as long as they consume oxygen), which would be able to get 60%–85% combined efficiency (direct electricity + waste heat steam turbine).[citation needed] Currently these fuel cell technologies can only process gaseous fuels, and they are also sensitive to sulfur poisoning, issues which would first have to be worked out before large scale commercial success is possible with coal. As far as gaseous fuels go, one idea is pulverized coal in a gas carrier, such as nitrogen. Another option is coal gasification with water, which may lower fuel cell voltage by introducing oxygen to the fuel side of the electrolyte, but may also greatly simplify carbon sequestration. However, this technology has been criticised as being inefficient, slow, risky and costly, while doing nothing about total emissions from mining, processing and combustion.[17] Another efficient and clean way of coal combustion in a form of coal-water slurry fuel (CWS) was well developed in Russia (since the Soviet Union time). CWS significantly reduces emissions saving the heating value of coal.

Coking and use of coke


Coke oven at smokeless fuel plant, South Wales

Coke is a solid carbonaceous residue derived from low-ash, low-sulfur bituminous coal from which the volatile constituents are driven off by baking in an oven without oxygen at temperatures as high as 1,000 °C (1,832 °F) so that the fixed carbon and residual ash are fused together. Metallurgical coke is used as a fuel and as a reducing agent in smelting iron ore in a blast furnace. The product is too rich in dissolved carbon, and must be treated further to make steel. The coke must be strong enough to resist the weight of overburden in the blast furnace, which is why coking coal is so important in making steel by the conventional route. However, the alternative route to is direct reduced iron, where any carbonaceous fuel can be used to make sponge or pelletised iron. Coke from coal is grey, hard, and porous and has a heating value of 24.8 million Btu/ton (29.6 MJ/kg). Some cokemaking processes produce valuable by-products that include coal tar, ammonia, light oils, and "coal gas".

Petroleum coke is the solid residue obtained in oil refining, which resembles coke but contains too many impurities to be useful in metallurgical applications.

Ethanol production

The reaction of coal and natural gas was used by a German manufacturer for Buna rubber: Chemische Werke Huls, at Marl, Germany, and AVCO Corp in the US. Consequently several references had described both Huls Arc Process and AVCO rotating arc reactor.[18][19] Both reactors are of cylindrical shape and have a rotating electric arc. The cathode is at the cylinder axis, while the anode is on the circumference. As methane gas provided the highest yield, then it is forced with coal powder into a vortex passing through the electric arc for few milliseconds.

Huls Arc Process[20] produced a mixture of acetylene and ethylene gases. The reaction conditions can be varied to determine the needed product. Increasing the Specific Energy Requirement (SER) favor acetylene production, and lower SER is for ethylene:

Enthalpy Change for Ethylene:[21] = 127.34 kJ/mol, while for acetylene: = 301.4 kJ/mol. As a consequence, recent production processes are using conventional heating instead of electric arc.

Hydration of ethylene gas producing ethanol is the most important process for ethanol production. Vapor phase process is the preferred one[22] in which ethylene and steam pass over a catalyst. One of the most accepted catalyst is diatomite impregnated with phosphoric acid.

Gasification

Coal gasification can be used to produce syngas, a mixture of carbon monoxide (CO) and hydrogen (H2) gas. This syngas can then be converted into transportation fuels like gasoline and diesel through the Fischer-Tropsch process. Currently, this technology is being used by the Sasol chemical company of South Africa to make gasoline from coal and natural gas. Alternatively, the hydrogen obtained from gasification can be used for various purposes such as powering a hydrogen economy, making ammonia, or upgrading fossil fuels.

During gasification, the coal is mixed with oxygen and steam (water vapor) while also being heated and pressurized. During the reaction, oxygen and water molecules oxidize the coal into carbon monoxide (CO) while also releasing hydrogen (H2) gas. This process has been conducted in both underground coal mines and in coal refineries.

(Coal) + O2 + H2O → H2 + CO

If the refiner wants to produce gasoline, the syngas is collected at this state and routed into a Fischer-Tropsch reaction. If hydrogen is the desired end-product, however, the syngas is fed into the water gas shift reaction where more hydrogen is liberated.

CO + H2O → CO2 + H2

High prices of oil and natural gas are leading to increased interest in "BTU Conversion" technologies such as gasification, methanation and liquefaction. The Synthetic Fuels Corporation was a U.S. government-funded corporation established in 1980 to create a market for alternatives to imported fossil fuels (such as coal gasification). The corporation was discontinued in 1985.

In the past, coal was converted to make coal gas, which was piped to customers to burn for illumination, heating, and cooking. At present, the safer natural gas is used instead.

Liquefaction

Coal can also be converted into liquid fuels like gasoline or diesel by several different processes. In the direct liquefaction processes, the coal is either hydrogenated or carbonized. Hydrogenation processes are the Bergius process,[23] the SRC-I and SRC-II (Solvent Refined Coal) processes and the NUS Corporation hydrogenation process.[24][25] In the process of low temperature carbonization coal is coked at temperatures between 680 °F (360 °C) and 1,380 °F (750 °C). These temperatures optimize the production of coal tars richer in lighter hydrocarbons than normal coal tar. The coal tar is then further processed into fuels. Alternatively, coal can be converted into a gas first, and then into a liquid, by using the Fischer-Tropsch process. An overview of coal liquefaction and its future potential has been done by others [26]

Coal liquefaction methods involve carbon dioxide (CO2) emissions in the conversion process. If coal liquefaction is done without employing either carbon capture and storage technologies or biomass blending, the result is lifecycle greenhouse gas footprints that are generally greater than those released in the extraction and refinement of liquid fuel production from crude oil. If CCS technologies are employed, reductions of 5-12% can be achieved in CTL plants and up to a 75% reduction is achievable when co-gasifying coal with commercially demonstrated levels of biomass (30% biomass by weight) in CBTL plants.[27] For most future synthetic fuel projects, Carbon dioxide sequestration is proposed to avoid releasing it into the atmosphere. Sequestration will, however, add to the cost of production. Currently all US and at least one Chinese synthetic fuel projects,[28] are including sequestration in their process designs.

Refined coal

Refined coal is the product of a coal upgrading technology that removes moisture and certain pollutants from lower-rank coals such as sub-bituminous and lignite (brown) coals.[1] It is one form of several pre-combustion treatments and processes for coal that alter coal's characteristics before it is burned. The goals of pre-combustion coal technologies are to increase efficiency and reduce emissions when the coal is burned. Depending on the situation, pre-combustion technology can be used in place of or as a supplement to post-combustion technologies to control emissions from coal-fueled boilers.

Coal as a traded commodity

The price of coal has gone up from around $30 per short ton in 2000 to around $150.00 per short ton as of September 26, 2008. As of October 31, 2008, the price per short ton has declined to $111.50.[29]

In North America, a Central Appalachian coal futures contracts are currently traded on the New York Mercantile Exchange (trading symbol QL). The trading unit is 1,550 short tons (1,410 t) per contract, and is quoted in U.S. dollars and cents per ton. Since coal is the principal fuel for generating electricity in the United States, coal futures contracts provide coal producers and the electric power industry an important tool for hedging and risk management.[30]

In addition to the NYMEX contract, the IntercontinentalExchange (ICE) has European (Rotterdam) and South African (Richards Bay) coal futures available for trading. The trading unit for these contracts is 5,000 tonnes (5,500 short tons), and are also quoted in U.S. dollars and cents per ton.[31]

Cultural usage

Coal is the official state mineral of Kentucky and the official state rock of Utah. Both U.S. states have a historic link to coal mining.

Some cultures uphold that children who misbehave will receive only a lump of coal from Santa Claus for Christmas in their stockings instead of presents.

It is also customary and lucky in Scotland to give coal as a gift on New Year's Day. It happens as part of First-Footing and represents warmth for the year to come.

No comments:

Post a Comment